Posted in

Can a roofing membrane be recycled?

If you’ve ever stood atop a commercial building on a sweltering summer day, wiping sweat from your brow while inspecting the roof, you’ve probably wondered: what happens to those big, black rolls of roofing membrane when they reach the end of their life? As a roofing membrane supplier who’s spent 12 years helping contractors, facility managers, and building owners pick the right materials for their projects, I get this question all the time. The short answer is yes—roofing membrane can be recycled—but the process isn’t as straightforward as tossing a cardboard box into a bin. There’s a lot of nuance here, and I want to break down what it means for our industry, why it matters, and where your company fits in. Roofing Membrane

Let’s start with what roofing membrane is, because not all membranes are created equal. The most common types you’ll encounter are TPO (Thermoplastic Olefin), EPDM (Ethylene Propylene Diene Monomer), PVC (Polyvinyl Chloride), and bitumen-based membranes (both modified and unmodified). Each has a different chemical makeup, and that directly impacts its recyclability. For example, thermoplastic membranes like TPO and PVC are made of polymer chains that can be melted down and reformed—think of them like plastic water bottles, which you know can be recycled into new products. EPDM, on the other hand, is a thermoset rubber, meaning its molecular bonds don’t break down when heated; it’s more like a car tire, which is tricky to recycle into high-quality products. Bitumen membranes, which are often asphalt-based with reinforcing fabrics, add another layer of complexity because of their asphalt and fiber components.

When I first started in this business, I assumed most roofing waste just went to landfills. It’s hard not to see it—at job sites, old membrane gets stripped off in huge sheets, rolled up, and hauled away. But in the last decade, things have shifted. Construction and demolition waste makes up 25% of all landfill waste in the U.S., according to the Environmental Protection Agency (EPA), and roofing materials are a big part of that. For a typical 50,000-square-foot commercial building, you’re looking at 100 tons or more of waste when the roof is replaced. That’s why more and more facilities are looking for ways to keep that material out of dumps—and as a supplier, we’ve had to adapt.

The first hurdle to recycling roofing membrane is collection. Unlike single-family home waste, which is often sorted at the curb, construction and demolition waste is usually mixed, so sorting membrane from other materials is key. Many recyclers now partner with roofing contractors to collect old membrane at job sites, either by designating a separate dumpster for it or picking up rolled membrane directly. But even when membrane is collected, it has to be clean. If it’s contaminated with grease, dirt, roofing nails, or leftover adhesive, it can’t be processed into new membrane. That’s why we work with our clients to educate their crews on how to strip membrane properly—minimizing debris, avoiding adhesives that can ruin recyclability, and keeping clean rolls separate from other waste.

Let’s talk about the most recyclable types first. TPO, which has grown in popularity because of its energy efficiency, is one of the easiest to recycle. There are facilities across the country, like those run by the Roofing Industry Recycling Program (RIRP), that collect TPO membrane, grind it into chips, remove any contaminants, and then melt it down to make new products. What kind of new products? Not just roofing membrane, either—recycled TPO has been used in plastic lumber for fence posts, park benches, and even automotive parts. That’s a big win, because it turns a waste product into something that’s used for years, not just decades.

PVC is another thermoplastic membrane that’s recyclable, though it has a bad rap for being “un green” because of its PVC chemical structure. But modern recycling processes for PVC have come a long way. The Roofing Industry Committee on Environmental Issues (RICCI) has developed standards for recycling PVC membrane, and many manufacturers now have take-back programs. When PVC membrane is recycled, it can be ground, cleaned, and melted to make new PVC roofing products, or even used in construction materials like pipes and window frames. The key here is that the process has to remove the plasticizers and additives that can make recycling harder—something we now require from our partner recyclers.

EPDM, as I mentioned earlier, is a thermoset rubber, so traditional melting doesn’t work. But there are innovative recycling methods here too. Some recyclers use a process called devulcanization, which breaks down the cross-links in EPDM’s rubber molecules, allowing it to be reprocessed. Recycled EPDM is often used in rubberized roofing underlayment, playground surfaces, and even road pavement. It’s not as high-quality as virgin EPDM, but it’s still a useful second life, and that’s better than landfill. Bitumen membranes, the workhorse of low-slope roofs, are also being recycled. Modified bitumen membranes (which have polymer additives) can be processed to extract the bitumen, which is then reused in asphalt for roads. Unmodified bitumen is trickier, but some facilities can blend it with other materials to make waterproofing products.

But here’s the catch: not all recyclers accept all types of membrane. I’ve had clients tell me they tried to recycle their old membrane, only to be turned away because their local recycler only takes TPO. That’s why it’s important to plan ahead. If you’re a facility manager, don’t wait until your roof is being replaced to figure out recycling—reach out to your membrane supplier early, and ask which recyclers they work with. We’ve built partnerships with three regional recycling facilities that accept all four major membrane types, so we can direct our clients to the right people. We also offer guidance on how to prepare your old membrane for recycling: roll it up tightly, keep it free of debris, and avoid using too much adhesive that can contaminate the load.

Another thing to consider is the cost. Recycling isn’t free. At a job site, you’ll pay a small fee to have your old membrane hauled to a recycler, instead of a landfill. For some contractors, that’s a sticking point—landfill fees are usually cheaper. But over the last few years, the cost of recycling has come down as facilities have scaled up their processes. Also, many states offer tax incentives for construction projects that divert waste from landfills, so that can offset the cost. We’ve had clients in California and Texas save up to 15% on their total roof replacement costs by choosing recycled membrane and recycling their old material.

I also want to address a common misconception: some people think that recycled membrane is lower quality than virgin material. That’s not true—for thermoplastic membranes, the recycled material is just as durable and energy-efficient as virgin, because the recycling process preserves the polymer’s structure. With EPDM and bitumen, it’s a different story, but the recycled versions are still suitable for secondary applications, and more and more manufacturers are developing blended products that use recycled material in new roof systems. In fact, I recently worked on a project where we used a TPO membrane made with 30% recycled content, and it performed exactly like a virgin membrane—no issues with leaks, durability, or energy savings.

So what does this mean for the future? As more companies commit to sustainability, the demand for recycled roofing membrane will only grow. We’re already seeing some large retail chains require their contractors to recycle 100% of old membrane on all their store projects. That’s a big shift, and it’s putting pressure on all of us in the industry to make recycling easier. As a supplier, we’re investing in education—hosting free webinars for contractors on recycling best practices, updating our product lines to be more recyclable (we now label every membrane with a recycling code, so clients know exactly how to process it at the end of life), and expanding our partnerships with recyclers.

But here’s the thing: recycling only works if everyone participates. Contractors have to strip membrane properly, facility managers have to choose to recycle instead of landfill, and suppliers have to make the process transparent and accessible. We can’t do it alone. If you’re a building owner, facility manager, or contractor, and you’re looking to replace your roof and want to recycle the old membrane, we’re here to help. We can walk you through the process, connect you with trusted recyclers, and help you choose a membrane that’s easy to recycle. We also offer recycled-content membrane options, so you can reduce your carbon footprint from the start.

At the end of the day, roofing membrane recycling isn’t just a “nice-to-have”—it’s a necessary part of building a more sustainable construction industry. The EPA estimates that if we recycled just 10% of roofing waste, we’d keep 10 million tons of material out of landfills every year. That’s equivalent to taking 2 million cars off the road for a year, or planting 15 million trees. It’s not a small number, and every roll of membrane we recycle adds up.

I’ve been in this business long enough to see how much the industry has changed. When I first started, sustainability was afterthought—now it’s a top priority for most of our clients. And as a roofing membrane supplier, I’m proud to be part of that change. We don’t just sell rolls of membrane; we work with our clients to find solutions that last decades, and that can be repurposed when their time is done.

If you’re ready to explore your options for roofing membrane recycling, or if you’re looking for a new membrane that’s designed with recyclability in mind, please reach out. We can discuss your project, answer any questions you have about the recycling process, and help you make a choice that’s good for your building and good for the planet. It’s not just about what happens when the roof is new—it’s about what happens when it’s time to replace it, and making sure that old membrane gets a second life.

PVC Wall Panel REFERENCES

  1. U.S. Environmental Protection Agency. (2022). Construction and Demolition Waste Generation, Recycling, and Disposal in the United States.
  2. Roofing Industry Recycling Program (RIRP). (2023). National Membrane Recycling Guidelines.
  3. Roofing Industry Committee on Environmental Issues (RICCI). (2022). PVC Roof Membrane Recycling Best Practices.
  4. National Roofing Contractors Association (NRCA). (2023). Sustainable Roofing Practices Guide.

Hangzhou Eastopo New Marterial Technology Co., Ltd.
As one of the most professional roofing waterproof membrane manufacturers and suppliers in China, we offer a wide range of products with superior quality. Please rest assured to wholesale custom made roofing waterproof membrane from our factory. Good service and reasonable price are available.
Address: Room 304-20, Block B, Building 1,2,3&4, Kaixuan Jinniu Fang, Shangcheng District, Hangzhou, Zhejiang, China.
E-mail: mj@eastopo.com
WebSite: https://www.eastopo.com/