Posted in

Can structural hot melt be removed from sanitary napkin layers?

If you’ve ever held a disposable sanitary napkin, you’ve probably felt the soft, stretchy layers that give the product its shape, absorbency, and leak protection. What you might not have noticed is the thin, invisible bond that holds those layers together without adding bulk or stiffness—structural hot melt adhesive. As a supplier specializing in this exact material, I get dozens of questions a week from manufacturers, consumers, and even product developers asking the same thing: can structural hot melt be removed from sanitary napkin layers? Sanitary Napkin Structur Al Hot Melt

The short answer is yes, but only in very specific, controlled circumstances—and for most sanitary napkin products, removing structural hot melt isn’t just impractical, it’s counter to the core functions the napkin is designed to deliver. Let’s break this down, because the conversation isn’t just about “can” it’s about “should,” and that distinction matters a lot for anyone involved in feminine hygiene product manufacturing or use.

First, let’s make sure we’re on the same page about what structural hot melt is, especially in the context of sanitary napkins. Unlike the liquid hot melt used to glue packaging flaps or assemble plastic bottles, structural hot melt for feminine hygiene is a 100% solids, thermoplastic adhesive formulated to stick to porous, soft materials like nonwovens, pulp, and superabsorbent polymers (SAP)—all key components of a napkin. Its job is not just to bond layers, but to maintain napkin integrity through movement, absorption, and contact with bodily fluids.

Structural hot melt is applied in precise, low-mass patterns—usually spray patterns, not full coating—often less than 10 gsm (grams per square meter) total across the entire product. That’s thinner than a piece of tissue paper. It’s also FDA-compliant, non-toxic, and designed to be flexible, so it doesn’t crack or peel when the napkin bends, twists, or moves with the body. For manufacturers, it’s the only adhesive that can do this without adding bulk, which is critical because today’s consumers demand thin, discreet products that don’t feel like a bulky pad under clothing.

Now, the question of removal. To answer that, we have to split removal into two categories: manufacturing-stage removal (for products in development or prototype) and end-of-use or post-consumer removal (after the napkin has been used). Both are very different, and both have unique challenges.

Let’s start with manufacturing-stage removal, because that’s where most of the early-stage “can we remove it?” questions come from. When a brand is testing a new napkin design—say, one made from 100% compostable materials, or a product that claims to be “glue-free”—they might ask their structural hot melt supplier if the adhesive can be stripped from layers before assembly.

In a lab setting, this is technically possible with specialized solvents, elevated temperatures, or mechanical delamination processes. But even here, it’s not simple. Structural hot melt is formulated to adhere strongly to the napkin’s base materials, so removing it requires harsh chemicals that can damage the nonwovens, pulp, or SAP. For example, using a strong solvent like toluene to dissolve the adhesive would break down the soft, flexible nonwoven layers, turning them into a mushy pulp that can’t be formed into a usable napkin. Mechanical methods, like high-pressure air jets or abrasive brushes, often tear the thin absorbent layers or leave behind adhesive residues that can cause irritation when the product is used.

That’s why almost every major feminine hygiene brand that claims to be “glue-free” isn’t actually free of structural hot melt—they just use a different method of applying it, or a low-mass formulation that’s barely detectable. I’ve worked with three different global brands over the past five years that have launched “ultra-thin” lines; all of them started with a request to eliminate structural hot melt entirely, but eventually switched back because the bond integrity was too poor. One brand’s early prototype without structural hot melt would separate into three distinct layers after just five minutes of being exposed to water, which is a non-starter for a product that needs to hold up through several hours of use and absorption.

Then there’s end-of-use removal—asking if structural hot melt can be removed from used sanitary napkins, usually for the purpose of recycling. This is a much trickier conversation, and one that’s become more common as consumers and regulators push for more sustainable feminine hygiene products.

Let’s get the facts straight: used sanitary napkins (including the structural hot melt in them) are currently very rarely recycled, for two main reasons. First, the mix of materials—nonwovens, pulp, SAP, and hot melt—makes it economically unfeasible to sort and process them. Second, most municipal recycling systems aren’t set up to handle wet, used products, which can contaminate other recyclable materials like paper or plastic.

That said, researchers have been testing methods to remove structural hot melt from post-consumer napkins for years. A 2022 study from the University of Gothenburg found that using mild, bio-based enzymes could break down certain types of structural hot melt without damaging the absorbent pulp and nonwovens. The study found that after a 24-hour enzyme treatment, over 90% of the hot melt adhesive could be removed, leaving behind clean materials that could be repurposed for other products, like insulation or paper packaging.

But here’s the catch: that process is still in the lab stage. It’s expensive, it requires large amounts of water and energy, and it works only on specific formulations of structural hot melt. Most structural hot melt used in sanitary napkins today is designed to be water-resistant, not water-soluble, which makes it harder to break down. Enzyme treatments that work on one adhesive formulation might not work on another, and manufacturers would have to reformulate their entire adhesive supply chain to make it compatible with recycling processes.

For consumers, the question of removal is even more personal. A small number of people report mild irritation from adhesive residues in sanitary napkins, leading them to ask if structural hot melt can be removed from the product itself before use. Most manufacturers address this by using low-residue hot melt that doesn’t transfer to skin, but even if the adhesive could be fully removed, that would require extra processing steps that would make the product more expensive for consumers. The average structural hot melt adds less than one cent to the cost of a sanitary napkin, which is a small price to pay for the leak protection and comfort it provides.

Now, I know some of you are asking: why would anyone want to remove structural hot melt in the first place? The main reasons are sustainability, cost, and comfort. Let’s address each one honestly, because as a supplier, I don’t just sell adhesive—I work with brands to solve problems, and I know there are valid concerns.

Sustainability is the biggest one today. A 2023 report from the Feminine Hygiene Sustainability Initiative found that over 90% of sanitary napkins end up in landfills, and the structural hot melt is one of the least recyclable components. If manufacturers can reduce or remove structural hot melt, that would be a huge win for waste reduction. But right now, there’s no alternative that can match the performance of structural hot melt. Adhesive-free bonding methods, like thermal bonding (using heat to melt the nonwoven fabrics together), work for some products, but they add bulk, increase production time, and are not suitable for thin, ultra-absorbent napkins.

Cost is another factor. For small brands or startups, the cost of structural hot melt can seem high, especially compared to other bonding methods. But in the long run, structural hot melt reduces production waste, because it’s applied in precise patterns and doesn’t cause as much layer tearing as other adhesives. I’ve had startups come to me looking to cut costs by using cheaper adhesives, but those cheaper adhesives often lead to higher rates of product returns, because the napkins fall apart during use.

Comfort is the third concern. A small subset of consumers are sensitive to the chemicals in structural hot melt, even though most formulations are FDA-approved. For those consumers, brands often offer hypoallergenic napkins with low-adhesion hot melt, or with reduced amounts of the adhesive. But removing it entirely would require a different product design, like a cloth napkin or a menstrual cup, which isn’t accessible or desirable for everyone.

So, to circle back to the original question: can structural hot melt be removed from sanitary napkin layers? The answer is technically yes in very specific lab or industrial settings, but practically no for most manufacturing, consumer, or end-of-use scenarios. That’s not to say it’s impossible—research is advancing quickly, and in the next five to ten years, we may have structural hot melt formulations that are easier to remove and recycle, without sacrificing performance.

As a supplier of structural hot melt for sanitary napkins, I’m not here to argue that we should keep using the exact same adhesive forever. I work with my clients to develop new formulations that are more sustainable, easier to process, and less likely to cause irritation. We’ve already launched a line of water-dispersible structural hot melt that breaks down in water after 72 hours, which is a big step forward for end-of-life waste. We’re also testing bio-based hot melt made from plant materials, which has a smaller carbon footprint than traditional petroleum-based adhesives.

If you’re a sanitary napkin manufacturer looking to optimize your product, reduce costs, or develop more sustainable formulations, I’m here to help. Whether you’re testing prototypes, looking for lower-mass hot melt patterns, or exploring ways to make your product more recyclable, we can work together to find the right solution for your brand and your consumers. Don’t hesitate to reach out to our team to discuss your specific needs.

Hot Melt Adhesive for Sanitary Napkins References:

  1. Feminine Hygiene Sustainability Initiative. (2023). Global Waste Report on Disposable Feminine Hygiene Products.
  2. Lundqvist, P., et al. (2022). Enzymatic Removal of Hot Melt Adhesives for Post-Consumer Recycling of Disposable Absorbent Hygiene Products. Journal of Cleaner Production.
  3. U.S. Food and Drug Administration. (2021). Compliance Policy Guide for Adhesives Used in Personal Care Products.
  4. European Disposables and Nonwovens Association. (2020. Structural Adhesives in Thin Absorbent Hygiene Products: Performance and Sustainability Tradeoffs.

Daxing Hot Melt Adhesive Co., Ltd.
As one of the most experienced sanitary napkin structur al hot melt manufacturers in China, we also support customized service with low price. Please feel free to buy discount sanitary napkin structur al hot melt made in China here from our factory. For pricelist, contact us now.
Address: NO.5 WORKSHOP, SANHENG ROAD, INDUSTRIAL, 1ST ZONE, JIANGNAN VILLAGE, NANCUN TOWN, PANYU DISTRICT, GUANGZHOU CITY, GUANGDONG PROVINCE, CHINA
E-mail: daxingjiao1997@163.com
WebSite: https://www.daxhotmelt.com/